User's Manual

AXIS M1043–W Network Camera
System Options
Click Default to reset a ll settings, including the IP address, to the factory default values. This button should be used with caution. The
Axis product can also be reset to factory default using the control button, see
Reset to factory default settings, on page 49 .
To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.
This can be useful for identif yin g the product am ong other products ins talle d in the same location.
For information about firmware upgrade, see
Upgrading the firmware, on page 50 .
Support
Support Overview
The System Options > Support > Support Overview page provides information on troubleshooting and contact information,
should you require technical assistance.
See also
Troubleshooting, on page 50 .
System Overview
To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information that
can be found here includes firmware version, IP address, network and security settings, event settings, image settings and recent log
items. Many of the captions are links to the proper Setup page.
Logs & Reports
The System Options > Support > Logs & R eports page generates logs and reports useful for system analysis and troubleshooting. If
contacting Axis Support, please provide a valid S erve r Report with your quer y.
System Log - Provides information about system events.
Access Log - Lists all failed attempts to access the product. The Access Log can als
obeconfi gured to list all connections to the
product (see below).
Server Report - Provides information about the product status in a pop-up window. The Access Log is automatically included
in the Server Report.
Parameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or
when contacting Axis Support.
Connection List - Lists all clients that are currently accessing media streams.
Crash Report - Generate s an archive with debugging informa tion. The repo rt takes several minutes to generate.
The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Configuration.
The Access Log can be co nfigured t o list all connections to the product (select Critical, Warnings & Info). If required, a different log
level can be used
when sending emails.
Advanced
Scr
ipting
S
cripting allows experienced use rs to customize and use their own scripts.
Caution
Improper use may cause unexpected behavio r and loss of contact with the Axis product.
Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide
assistance for problems with customized scripts.
48