User's Manual

AXIS M1043–W Network Camera
System Options
To open the Script Editor, go to System Options > Advanced > Scripting. It is recommended to create a b ackup file before
customizing the scripts. If a script causes problems, reset the product to its factory default settings, see
page 49 .
For m ore information, see www.axis.com/developer
File Upload
Files, fo r example web p ages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, go
to System Options > Advanced > File Upload.
Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the
selected user group ( viewer, operator or administrator) for the uploaded file.
Plain Config
Plain Config is for advanced users w ith experience of Axis product configuration. Most parameters can be set a nd modified from this
page. Help is available from the standard help pages.
To open Plain Config, go to System Options > Advanced > Plain Config.
Reset to factory default settings
This will reset all parameters, including the IP address, to the factory default settings:
1. Disconnect power from the product.
2. Press and hold the Control b utton and reconnect power (see
Hardware overview, on page 5 ).
3. Keep the Control button pressed for about 15 seconds until the Status indicator flashes ambe r.
4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The
product has been reset to the factory d efault settings. The d efault IP address is 192.168.0.90
5. Re-assign the IP address.
It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.
49