User's Manual

AXIS M1043–W Network Camera
Hardware overview
3.3 V max 50 mA
1
2
3
4
LED indicators
LED
Color
Indication
Green
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 MBit/s network. Flashes for network activity.
Network
Unlit No network connection.
Green Steady green for normal operation.
Amber
Steady during startup and when restoring settings.
Status
Red
Slow flash for failed upgrade.
Green
Normal operation.
Power
Amber
Flashes green/amber during firmware upgrade.
LED
Color
Indication
Unlit Wired mode.
Green Steady for connection to a wir
eless network. Flashes for network activity.
Red
Steady for no wireless network connection. Flashes while scanning for wireless networks.
Wireless
Amber
Steady during wire le ss network pairing. Flashes for wireless netw ork activity.
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options >Ports
& Devices >LED. See the o nline help for more informatio n.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
7