User's Manual

19
▲Using 2-in-1 charger (charger + data cable)
The 2-in-1 charger may charge the battery through the
mobile phone.
1. Connect the data cable and charger
2. Connect the data cable of the 2-in-1 charger to the
I/O slot of the mobile phone.
3. Connect the charger plug of the 2-in-1 charger to the
appropriate power outlet.
4. During charging, the icon of battery status blinks
until the charging completes.
5. After charging, the battery icon stops flashing, and
you can pull out the 2-in-1 charger.
Note: If the battery voltage is too low and can’t turn on
the mobile phone, the charging icon may appear on the
screen after several minutes. The mobile phone may be
turned on or off during charging.
Warning: Make sure that the local voltage and power
match the rated voltage and power of the 2-in-1 charger.