Specifications

Operation
3-7
Axis Wake Research reminds you that when your boat is fully loaded with the maximum
number of persons and gear as indicated on the capacity plate, boat speed and
performance will be affected. Operate a boat in this condition with extra care.
Axis Wake Research designs and engineers our boats to have the best possible
performance at sea level with factory-installed equipment. For this reason, it is likely
your boat can be equipped or loaded in a way that can restrict its performance when
operated at higher elevations. Not all available options may be able to be utilized under
these conditions. Consult your dealer for more information.
Fueling
It is very important to take special precautions to avoid spillage while fueling your boat.
Gasoline vapors are heavier than air and will develop in the lower cavities of the boat,
such as the bilge.
Do not allow the fuel tank to empty completely during
operation. Doing so may damage the fuel pump. Damage from
running fuel systems empty is not be covered under standard
warranty.
Below is a list of guidelines you should follow when fueling your boat:
1) Extinguish all cigarettes and other flame or spark producing items.
2) Make sure all power is off, and do not operate any electrical switches.
3) Be sure to wipe off any
spillage that may have
occurred.
4) Operate the bilge blower
for a minimum of four
minutes before starting
the engine.
Figure 3-7. Fueling
Do not overfill fuel tank. The fuel tank will expand and
contract based on weather conditions, and can cause fuel to
spill out the fuel exhaust vent. Damaged caused to your boat
from leaking fuel due to overfilling is not covered by your
warranty.
!
KC-0027C-A
!
Chapter 3_12_Axis_ Chapter 3 doc.qxd 9/16/11 1:10 PM Page 7