User Manual

ManualsBrandsAxis ManualsHardwareP3807-PVE Network Camera panoramic camera - dome

Table Of Contents

AXISP3807-PVENetworkCamera

UserManual

Summary of content (18 pages)

PAGE 1
AXIS P3807-PVE Network Camera User Manual
PAGE 2
AXIS P3807-PVE Network Camera Table of Contents Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to access the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About secure passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product webpage overview . . . . . . . . .
PAGE 3
AXIS P3807-PVE Network Camera Product overview Product overview 1 2 3 4 5 6 7 8 Network connector SD card slot Grounding contact Control button Status LED indicator Roll ±10° Tilt 0°, 35°, 45°, 55° Pan ±180° 3
PAGE 4
AXIS P3807-PVE Network Camera How to access the product How to access the product AXIS IP Utility and AXIS Device Manager are recommended methods for finding Axis products on the network and assigning them IP addresses in Windows®. Both applications are free and can be downloaded from axis.
PAGE 5
AXIS P3807-PVE Network Camera Setup Setup Product webpage overview 1 2 3 4 5 6 Live view control bar Live view Product name Controls Video control bar Settings toggle 5
PAGE 6
AXIS P3807-PVE Network Camera Setup 7 Settings tabs About the product's built-in help You can access the built-in help from the product’s webpage. The help provides more detailed information on the product’s features and their settings. Image quality How to use leveling guide To adjust the view in relation to a reference area or object, use the leveling guide in combination with mechanical adjustment of the camera.
PAGE 7
AXIS P3807-PVE Network Camera Setup 1. Go to Settings > System > Orientation and click . 2. Adjust the camera mechanically until the position of the reference area or object, is aligned with the leveling guide. About capture modes Capture mode defines the maximum frame rate available in the Axis product. Depending on which capture mode you select, you may not be able to use WDR. A capture mode consists of a resolution and the corresponding frame rate available in the product.
PAGE 8
AXIS P3807-PVE Network Camera Setup 1. Go to Settings > Image > Day and night, and make sure that the IR cut filter is set to Auto. 2. To determine at what light level you want the camera to shift to night mode, move the Threshold slider toward Bright or Dark. Note If you set the shift to occur when it’s brighter, the image remains sharper as there will be less low-light noise.
PAGE 9
AXIS P3807-PVE Network Camera Setup Image without WDR. Image with WDR. Note WDR may cause artifacts in the image. Find out more about WDR and how to use it at axis.com/web-articles/wdr Privacy masks How to hide parts of the image with privacy masks What is a privacy mask? A privacy mask is a user-defined area that covers a part of the monitored area. In the video stream, privacy masks appear either as blocks of solid color or with a mosaic pattern.
PAGE 10
AXIS P3807-PVE Network Camera Setup Overlays About overlays Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp, or during product installation and configuration. How to show an image overlay 1. Go to Settings > Overlay. 2. Select Create overlay and select Image overlay. 3. Choose Import. 4. Upload own overlay image. 5. Choose the image from the list of images. 6.
PAGE 11
AXIS P3807-PVE Network Camera Setup Streaming and storage How to choose video compression format Decide which compression method to use based on your viewing requirements, and on the properties of your network. The available options are: Motion JPEG Motion JPEG or MJPEG is a digital video sequence that is made up of a series of individual JPEG images. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.
PAGE 12
AXIS P3807-PVE Network Camera Setup Events About events The event pages allow you to configure your product to perform actions when different events occur. For example, the product can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when the action is triggered is called an action rule. How to trigger an action 1. Go to Settings > System > Events to set up an action rule.
PAGE 13
AXIS P3807-PVE Network Camera Setup 2. Set shock detection to on, and set a value for the shock sensitivity. Create an action rule: 3. Go to Settings > System > Events and add an action rule. 4. Type a name for the action rule. 5. From the list of triggers, select Detectors and then select Shock detection. 6. From the list of schedules, select After Hours. 7. From the list of actions, select Send Video Clip. 8. Select an existing stream profile or create a new one. 9.
PAGE 14
AXIS P3807-PVE Network Camera Troubleshooting Troubleshooting If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support How to reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values. To reset the product to the factory default settings: 1. Disconnect power from the product. 2.
PAGE 15
AXIS P3807-PVE Network Camera Troubleshooting 1. Download the latest firmware file to your computer, available free of charge at axis.com/support/firmware 2. Log in to the product as an administrator. 3. Go to Settings > System > Maintenance. Follow the instructions on the page. When the upgrade has finished, the product restarts automatically. AXIS Device Manager can be used for multiple upgrades. Find out more at axis.
PAGE 16
AXIS P3807-PVE Network Camera Troubleshooting Problems with streaming Multicast H.264 only accessible by local clients Check if your router supports multicasting, or if the router settings between the client and the product need to be configured. The TTL (Time To Live) value may need to be increased. No multicast H.264 displayed in the client Check with your network administrator that the multicast addresses used by the Axis product are valid for your network.
PAGE 17
AXIS P3807-PVE Network Camera Specifications Specifications To find the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation. LED indicators Status LED Indication Unlit Connection and normal operation. Green Shows steady green for 10 seconds for normal operation after startup completed. Amber Steady during startup. Flashes during firmware upgrade or reset to factory default.