AXIS P33 Network Camera Series AXIS P3374–V AXIS P3374–LV AXIS P3375–V AXIS P3375–LV AXIS P3375–VE AXIS P3375–LVE User Manual
AXIS P33 Network Camera Series Table of Contents About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3374-LV and P3375-LV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3374-V and P3375-V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3375-LVE . . . . . . . . . . . . . . . . . .
AXIS P33 Network Camera Series About this manual About this manual This user manual describes multiple products. Some of the instructions may not be relevant for your product.
AXIS P33 Network Camera Series Product overview Product overview P3374-LV and P3375-LV 1 2 Camera unit Dome cover 1 2 3 4 5 6 7 Network connector (PoE) Audio out LED indicator Audio in I/O connector Control button SD card slot (microSD/microSDHC) 4
AXIS P33 Network Camera Series Product overview P3374-V and P3375-V 1 2 3 Camera unit View protector Dome cover 1 2 3 4 5 6 7 Network connector (PoE) Audio out LED indicator Audio in I/O connector Control button SD card slot (microSD/microSDHC) 5
AXIS P33 Network Camera Series Product overview P3375-LVE 1 2 3 4 5 Mounting bracket Unit casing Dome cover Weathershield Camera unit 6
AXIS P33 Network Camera Series Product overview 1 2 3 4 5 6 7 Network connector (PoE) Audio out LED indicator Audio in I/O connector Control button SD card slot (microSD/microSDHC) 7
AXIS P33 Network Camera Series Product overview P3375-VE 1 2 3 4 5 6 Mounting bracket Unit casing Dome cover Weathershield Camera unit View protector 1 2 3 Network connector (PoE) Audio out LED indicator 8
AXIS P33 Network Camera Series Product overview 4 5 6 7 Audio in I/O connector Control button SD card slot (microSD/microSDHC) 9
AXIS P33 Network Camera Series How to access the product How to access the product AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products on the network and assigning them IP addresses in Windows®. Both applications are free and can be downloaded from axis.
AXIS P33 Network Camera Series How to access the product The default root account has full privileges and should be reserved for administrative tasks. Always create a user account with limited privileges for daily use. This reduces the exposure of the administrative account. 1. Make sure to follow the instructions about secure passwords, see About secure passwords on page 10. 2. Type a password and then retype it to confirm the spelling. 3. Click Create login. The password has now been configured.
AXIS P33 Network Camera Series Setup Setup About the product's built-in help You can access the built-in help through your product’s web page. The help provides more detailed information on the product’s features and their settings. Adjust focus and zoom NOTICE TICE NO This is an electronically-focused camera. Adjusting focus and zoom manually on the camera can damage the lens. Note Due to the dome’s refraction, the image may appear slightly out of focus once the dome has been placed.
AXIS P33 Network Camera Series Setup How to benefit from IR light in low-light conditions using night mode Your camera delivers color images during the day. As light diminishes, you can set the camera to automatically shift to night mode. With this setting enabled, the camera delivers black-and-white images with the help of IR light. 1. Go to Settings > Image > Day and night, and make sure that the IR cut filter is set to Auto. 2.
AXIS P33 Network Camera Series Setup About view area A view area is a cropped part of the full view. You can stream and store the view area instead of the full view to minimize bandwidth and storage needs. If you enable PTZ for the view area, you can pan, tilt and zoom within it. By using a view area you can remove parts of the full view, for example, the sky. When you set up a view area, we recommend you to set the video stream resolution to the same size as or smaller than the view area size.
AXIS P33 Network Camera Series Setup How to show a text overlay when the camera detects motion This example explains how to display the text “Motion detected” when the camera detects motion: 1. Go to Settings > Overlay. 2. Enter #D in the text field. 3. Choose alignment, text size and appearance. 4. Include the text overlay. 5. Go to System > Events > Action rules. 6. Create an action rule with AXIS Video Motion Detection as trigger. 7. From the list of actions, select Overlay text. 8.
AXIS P33 Network Camera Series Setup - Turn on dynamic GOP and set a high GOP length value. - Increase the compression. - Turn on dynamic FPS. How to set up network storage To store recordings on the network, you need to set up network storage: 1. Go to Settings > System > Storage. 2. Click Setup under Network storage. 3. Enter the IP address of the host server. 4. Enter the name of the shared location on the host server. 5.
AXIS P33 Network Camera Series Setup 8. Select an existing stream profile or create a new one. 9. Set the pre-trigger time to 5 seconds. 10. Set the post-trigger time to 60 seconds. 11. Select SD card from the list of storage options. 12. Click Ok. How to record video when a PIR detector senses motion This example explains how to connect an Axis PIR detector to the camera, and set up the camera to start recording when the detector senses motion.
AXIS P33 Network Camera Series Setup How to detect tampering with input signal This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the I/O connector, see page 23. 1. Go to Settings > System > I/O Ports and enable Supervised I/O. Create an action rule: 1. Go to Settings > System > Events and create an action rule. 2. Type a name for the action rule. 3. From the list of triggers, select Input Signal and then Digital input port.
AXIS P33 Network Camera Series Troubleshooting Troubleshooting How to reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values. To reset the product to the factory default settings: 1. Disconnect power from the product. 2. Press and hold the control button while reconnecting power. See Product overview. 3.
AXIS P33 Network Camera Series Troubleshooting 3. Go to Settings > System > Maintenance in the product’s webpage and follow the instructions. When the upgrade has finished, the product restarts automatically. AXIS Camera Management can be used for multiple upgrades. Find out more at axis.com/products/axis-camera-management Technical issues, clues and solutions If you can’t find what you’re looking for here, try the troubleshooting section at axis.
AXIS P33 Network Camera Series Troubleshooting Problems with streaming Multicast H.264 only accessible by local clients Check if your router supports multicasting, or if the router settings between the client and the product need to be configured. The TTL (Time To Live) value may need to be increased. No multicast H.264 displayed in the client Check with your network administrator that the multicast addresses used by the Axis product are valid for your network.
AXIS P33 Network Camera Series Specifications Specifications To find the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation. LED indicators Note Status LED Indication Unlit Connection and normal operation. Green Shows steady green for 10 seconds for normal operation after startup completed. Amber Steady during startup. Flashes during firmware upgrade or reset to factory default.
AXIS P33 Network Camera Series Specifications For audio in, the left channel is used from a stereo signal. 3.5 mm audio connectors (stereo) 1 Tip 2 Ring 3 Sleeve Audio Input Microphone/Line in Microphone bias voltage Ground Audio Output Line out, mono Line out, mono Ground The internal microphone is used by default; the external microphone is used when connected. It is possible to disable the internal microphone by connecting a plug to the microphone input.
AXIS P33 Network Camera Series Specifications 1 2 A B C 0 V DC (-) DC output 12 V, max 50 mA I/O configured as input I/O configured as supervised input I/O configured as output 24
User Manual AXIS P33 Network Camera Series © Axis Communications AB, 2017 Ver. M1.8 Date: October 2017 Part No.
