User Manual
Table Of Contents
- toc
- About this manual
- Solution overview
- Product overview
- Find the device on the network
- Access the device
- Setup
- Webpage overview
- Image quality
- Privacy masks
- Overlays
- Streaming and storage
- Events
- Set up rules and alerts
- Record video when the camera detects motion
- Show a text overlay in the video stream when the device detects motion
- Send live video and audio to a mobile phone
- Record video when the camera detects loud noises
- Detect tampering with input signal
- Send an email automatically if someone spray paints the lens
- Set up intrusion alarm
- Applications
- Troubleshooting
- Specifications
AXISP3245NetworkCameraSeries
Setup
1.Setupthestreamproletoincludeaudio,seeAddaudiotoyourrecordingonpage19.
Turnonaudiodetection:
1.GotoSettings>System>Detectors>Audiodetection.
2.Adjustthealarmlevelaccordingtoyourneeds.
Createarule:
1.GotoSettings>System>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,underAudio,selectAudioDetection.
4.Inthelistofactions,underRecordings,selectRecordvideo.
5.Selectthestreamprolewhereaudiohasbeenturnedon.
6.Settheprebuffertimeto5seconds.
7.Setthepostbuffertimeto60seconds.
8.Inthelistofstorageoptions,selectSDcard.
9.ClickSave.
Detecttamperingwithinputsignal
Thisexampleexplainshowtotriggeranalarmwhentheinputsignalhasbeencutorshort-circuited.Formoreinformationaboutthe
I/Oconnector,seepage29.
1.GotoSettings>System>I/OPortsandturnonSupervisedI/O.
Createarule:
1.GotoSettings>System>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectDigitalinputandthenselectaport.
4.Inthelistofactions,selectSendnoticationtoemailandthenselectarecipientfromthelist.GotoRecipients
tocreateanewrecipient.
5.Typeasubjectandamessagefortheemail.
6.ClickSave.
Sendanemailautomaticallyifsomeonespraypaintsthelens
1.GotoSystem>Detectors.
2.TurnonTriggerondarkimages.Thiswilltriggeranalarmifthelensissprayed,covered,orrenderedseverelyoutoffocus.
3.SetadurationforTriggerafter.Thevalueindicatesthetimethatmustpassbeforeanemailissent.
Createarule:
1.GotoEvents>Rulesandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectTampering.
22