User Manual
Table Of Contents
- toc
- About this manual
- Solution overview
- Product overview
- Find the device on the network
- Access the device
- Setup
- Webpage overview
- Image quality
- Privacy masks
- Overlays
- Streaming and storage
- Events
- Set up rules and alerts
- Record video when the camera detects motion
- Show a text overlay in the video stream when the device detects motion
- Send live video and audio to a mobile phone
- Record video when the camera detects loud noises
- Detect tampering with input signal
- Send an email automatically if someone spray paints the lens
- Set up intrusion alarm
- Applications
- Troubleshooting
- Specifications
AXISP3245NetworkCameraSeries
Setup
4.Inthelistofactions,selectSendnoticationtoemailandthenselectarecipientfromthelist.GotoRecipients
tocreateanewrecipient.
5.Typeasubjectandamessagefortheemail.
6.ClickSave.
Setupintrusionalarm
Important
TosetupanintrusionalarmyouneedtheAXISDomeIntrusionSwitchC.
Withadomeintrusionswitchmountedinsidethecamera,youcanreceiveanoticationifsomeoneremovesthecameradome.
Beforeyoustart
•Connecttheintrusionalarmswitchtopin1(ground)andpin3(digitalinput)ofthecamera’sI/Oconnector.
Conguretheinputport
1.GotoSettings>System>I/Oports.
2.ForPort1:
2.1SelectClosedcircuit(NC)inthedrop-downmenu
.
Createarule
1.GotoSettings>System>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,underI/O,selectDigitalinput.
4.Inthelistofports,selectInput1.
5.Inthelistofactions,underNotications,selectSendnoticationtoemail.
6.SelectarecipientfromthelistorgotoRecipientstocreateanewrecipient.
7.Typeasubjectandamessagefortheemail.
8.ClickSave.
Applications
Applications
AXISCameraApplicationPlatform(ACAP)isanopenplatformthatenablesthirdpartiestodevelopanalyticsandotherapplications
forAxisproducts.Tondoutmoreaboutavailableapplications,downloads,trialsandlicenses,gotoaxis.com/applications.
TondtheusermanualsforAxisapplications,gotoaxis.com.
Note
•Severalapplicationscanrunatthesametimebutsomeapplicationsmightnotbecompatiblewitheachother.Certain
combinationsofapplicationsmightrequiretoomuchprocessingpowerormemoryresourceswhenruninparallel.Verify
thattheapplicationsworktogetherbeforedeployment.
23