Datasheet

31
Axis video server - Live View Config
Viewer Settings
Enable MPEG-4 decoder installation - By checking/unchecking this box, the
administrator can enable or disable the installation of the MPEG-4 decoder included with
AMC. This is used to prevent the installation of unlicensed copies. Further decoder licenses
can be purchased from your Axis dealer.
Enable recording button for MPEG-4 - Enabling this button allows the user to start an
MPEG-4 recording directly from the Live View page.
Show crosshair in PTZ joystick mode - This will enable the display of a crosshair in the
video image when the the PTZ mode is set to joystick.
Use PTZ joystick mode as default - Enabling this sets the PTZ mode to joystick. The mode
can be changed temporarily on the PTZ Control Panel, but will default to joystick if this is
selected.
HTML Examples
Live video from the Axis video server can be added to your own web page.
Select the preferred Video Format from the drop down list. The available options are
Motion JPEG, MPEG-4 using AMC and MPEG-4 using QuickTime. If MPEG-4 using AMC is
set as the video format, note that a separate MPEG-4 license is required for each viewer.
The Motion JPEG selection has additional settings for Image Type, Image size and other
optional settings for configuring the video stream to suit your web page. Click Update
when satisfied.
The video server then generates the required source code for your configuration. Copy this
code and paste it into your own web page code.
External Video
You can add links to other Axis network devices available over the network. These sources
can be displayed on the Live View page, just as if they were video sources connected
directly to the Axis video server.
Click the Add button to open the External Video Source Setup dialog, which is used to
make all the necessary settings.
Example of a path to an external video source:
http://192.168.0.125/axis-cgi/mjpeg/video.cgi