Datasheet

9
Axis video server - Product description
Video Output (AXIS 241S/SA/AXIS 243SA) - Loopthrough connection to the video signal
from the Video In connector. Terminated with a coaxial/BNC connector. Allows direct
connection of e.g. an external monitor. Set DIP switch to OFF when in use.
Line Out (AXIS 241SA, AXIS 243SA and AXIS 241QA) - Mono audio output (line level),
which can be connected to a public address (PA) system or an active speaker with a
built-in amplifier. A pair of headphones can also be attached.
Line/Mic In (AXIS 241QA, AXIS 241SA and AXIS 243SA) - Single 3.5mm input for a
mono microphone, or line level mono signal (only the left channel is used from a stereo
signal).
Rear panel - all models
Power adapter
connector
12-pin I/O terminal
connector
RS-232
connector
Network
connector
Serial number on underside label
Power adapter connector - For connection of the power adapter.
I/O terminal connector - The I/O terminal connector provides the physical interface to 4
digital transistor outputs, 4 digital inputs and an RS-485 interface. See
Unit connectors, on
page 58 for more information.
Note: The I/O terminal connector also provides an auxiliary connection point for DC
power.
Network connector - The Axis video server connects to the network via a standard
network cable, and automatically detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet).
RS-232 connector - A 9-pin D-SUB connector providing an RS-232 serial connection.
Typically used for connecting Pan/Tilt/Zoom devices. See
Unit connectors, on page 58 for
more information.