User`s manual

8
AXIS 241Q/S/QA/SA - Product Description
AXIS 241S/SA Front Panel
Indicators - After completion of the startup and self test routines, the multi-colored
Network, Status, Power Indicators flash as follows:
DIP Switches - upon delivery the AXIS 241S/SA is configured for composite video input.
Note: If the AXIS 241S/SA is to be connected in loop-through with other equipment, disable the input termina-
tion by setting switch 1 to the up-position (OFF). Failure to do this may cause reduced image quality.
Control Button - Press this button to restore the factory default settings, as described in
Resetting to the Factory Default Settings, on page 53, or to install using AXIS Internet
Dynamic DNS Service (see AXIS 241Q/S/QA/SA Video Server Installation Guide).
Network
Unlit No connection.
Green Steady for connection to a 100 Mbit/s network. Flashes for network activ-
ity.
Amber Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Status
Unlit When configured for “no flash” on camera access.
Green Steady for normal operation. Can be configured to flash green at intervals
whenever the camera is accessed. See the online help for more informa
-
tion.
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Switch 1 2 3 4
Description
75 ohm video in
termination
75 ohm video out
termination
Connects video in and
video out
Not used
Composite video input
on off on n/a
Y/C video input on on off n/a
AXIS 241S
AXIS 241SA
Control Button
Control Button