User`s manual

9
AXIS 241Q/S/QA/SA - Product Description
Video Input - Coaxial BNC connector supporting a single composite video source. The
physical connection is made using 75 Ohm coax video cable with a recommended
maximum length of 800 feet (250 meters).
Note: The AXIS 241S/SA supports conversion between composite video and Y/C (S-video) using an Y/C to BNC
cable.
Video Output - A single video loop-through (VIDEO OUT) connected in parallel with
VIDEO IN and terminated with a coax/BNC connector. Allows direct connection of e.g. an
external monitor. Set DIP switch to OFF when in use.
Line Out (AXIS 241SA only) - Mono audio output (line level), which can be connected to a
public address (PA) system or an active speaker with a built-in amplifier. A pair of
headphones can also be attached.
Line/Mic In (AXIS 241SA only) - One 3.5mm input for a mono microphone, or for line-in
mono signal (only the left channel is used from a stereo signal).