Datasheet

ENGLISH

Setup in Infrastructure Mode

This procedure works for setting up a print server in infrastructure

mode when the Access Point is unencrypted. If the Access Point is

encrypted, go to Setup in Diagnostic Mode, on page 13.

Before You Start:

1. Insert the AXIS OfficeBasic USB Wireless G CD into your

CD-drive.

2. Select Setup Wizard to install the wireless print server and

configure the connected printer.

• Check the SSID used by the Access Point.

• Check your network settings, i.e. available IP addresses, netmask

and gateway.

• Ensure that the TCP/IP protocol is installed on your computer.

• Ensure that the print server’s DIP is switched to NOR.

The Wizard will automatically install these components in

C:\Program Files\Axis Communications\AXIS OBW Wizard:

• AXIS OBW Wizard.exe

• AXIS OBW Network Printer Port. DLL (Wireless Print Monitor)

After installation, AXIS OBW Wizard will be available from Start |

Programs | Axis Communications.

AXIS OBW Wizard will start in the same language as your operating

system, see Technical Specifications, on page 124.

_book.bk Page 9 Tuesday, April 26, 2005 9:36 AM