Datasheet
AXIS 212 PTZ/AXIS 212 PTZ-V - Video and Image settings
16
Video and Image settings
Image
Image Appearance - Use these settings to change the image as required. The video image can be fine-tuned by
adjusting the resolution, compression level, and the white balance.
The configuration of the video image will
affect the camera’s overall performance, depending on how it is used
and on the available bandwidth. Setting a higher resolution and a lower compression improves video image
quality, but increases the amount of bandwidth used. Please see the online help for further information on these
settings.
Overlay Image
Use these settings to include:
a) an image as an overlay, and/or
b) the date and time, along with text of your own.
Text overlays are all included on one line at the top or bottom
of the video
image. Image overlays can be placed anywhere in
the video image.
See Ov
erlay Image, on page 17 for instructions on how to
upload an overlay image to the AXIS 212 PTZ/AXIS 212
PTZ-V.
Video Stream - Define the maximum video stream time per session in seconds, minutes or hours. When the set
time has expired, a new stream can be started by refreshing the page in the browser. For unlimited video stream
time, select the Unlimited radio button. Note that the maximum video stream time does not apply to clients
connecting via multicast.
The fram
e rate allowed to each viewer can also be limited, to reduce bandwidth usage. To allow the highest
available frame rate, select the Unlimited radio button.
Text, date and
time overlay
Image overlay