Datasheet
AXIS 212 PTZ/AXIS 212 PTZ-V - Live View Config
21
Live View Config
Layout
These are the tools for deciding the layout of the
Live View page. The layout can be set in 3 ways:
• Use Axis look - the layout is unchanged.
• Use custom settings - modify the default page
with your
own colors, images etc. Click the
Configure button and see the following page.
• Own Home Page - Upload and use your own
custom page as the default
web page. Click the
Configure button and see the Custom Settings
page.
Custom settings
To change the background picture, banner, and colors,
adjust the settings under Modify the Axis look.
To use your own file for example, a banner, first upload
it
(see the next page) or select External and enter the
path to the file.
Upload Own Web Files - Your own web files, background
pictures etc., must first be uploaded to the AXIS 212
PTZ/AXIS 212 PTZ-V in order to be available for
selection in the Custom Settings setup dialog. Once
uploaded, the files are shown in the drop-down list.
1. Enter the path to the file, for example, a file
located
on your workstation or click the
Browse button.
2. Select the user level for the uploaded file. Setting the user access level means that you have complete
control over which pages can be viewed by which users.
3. When the path is shown correctly in the text field, click the Upload button.
All uploaded files are shown in the list in the lower section of the page. To
remove a file, check the box provided
next to it and then click the Remove button.
• To use your uploaded file, click the radio button and
select the file from the drop-down list by Own:
• To use an external file located somewhere
other than in the AXIS 212 PTZ/AXIS 212 PTZ-V, click the radio
button and enter the URL by External.
Note:
Unchecking the box for Show setup link removes the link from the camera’s web pages. The setup tools will then only be accessible by
entering the full setup address into the address/URL field of a browser, i.e. http://<ip address>/operator/basic.shtml