Datasheet

AXIS 212 PTZ/AXIS 212 PTZ-V- System Options
37
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does
cause problems, reset the unit to its factory default settings. A backup file may be of use to return the unit
to its latest configuration.
Axis strongly recommends that you do not use this
function unless you fully understand the consequences.
Axis support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer
pages at www.axis.com/developer
Plain Config - This function is for the advance
d user with experience of Axis network camera configuration. All
parameters can be set and modified from this page. Help is available from the standard help pages.
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page
(as described in Maintenance, on page
36) or use the Control button on the underside of the camera (see page 6)
as described below:
Using the Control Button
To reset the camera to the factory
default settings using the Control Button:
1. Disconnect the power adapter.
2.
Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to
15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete
and the camera has been reset. The unit will now have the default IP address 192.168.0.90
Note:
Resetting to the factory default settings using the Control Button will cause all parameters (including the IP address) to be reset. Refer
to Maintenance, on page 36 for other methods that do not reset the IP address.