USER MANUAL AXIS P3367–V Fixed Dome Network Camera
About this document This manual is intended for administrators and users of AXIS P3367–V Fixed Dome Network Camera, and is applicable to firmware 5.40 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications. Later version of this document will be posted to the Axis website, as required.
AXIS P3367–V Fixed Dome Network Camera Table of contents Hardware overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P3367–V Fixed Dome Network Camera Hardware overview Hardware overview 1 2 3 1 2 3 4 5 6 7 8 5 4 6 7 8 Part number (P/N) & Serial number (S/N) SD card slot Network connector (PoE) Audio out Network, Status and Power LED indicators Audio in I/O connector Control button Connectors Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet (PoE). A shielded network cable (STP) must be used to protect the product against power surges. Audio in (pink) - 3.
AXIS P3367–V Fixed Dome Network Camera Hardware overview I/O connector Note For technical specifications, see page 50. I/O terminal connector - Use in applications for e.g. motion detection, event triggering, time lapse recording and alarm notifications. In addition to an auxiliary power and a GND pin, the I/O terminal connector provides the interface to: • Digital output — For connecting external devices such as relays and LEDs.
AXIS P3367–V Fixed Dome Network Camera Hardware overview LED indicators LED Color Indication Network Green Steady for connection to a 100 MBit/s network. Flashes for network activity. Amber Steady for connection to a 10 MBit/s network. Flashes for network activity. Unlit No network connection. Green Steady green for normal operation. Amber Steady during startup and when restoring settings. Red Slow flash for failed upgrade. Green Normal operation.
AXIS P3367–V Fixed Dome Network Camera Accessing the product Accessing the product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See Technical Specifications, on page 50.
AXIS P3367–V Fixed Dome Network Camera Accessing the product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must configure your network router to allow incoming data traffic to the product. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the product. This is enabled from Setup > System Options > Network > TCP/IP Advanced.
AXIS P3367–V Fixed Dome Network Camera Accessing the product Configure capture mode Capture mode defines how image data is taken from the image sensor in regard to resolution and frame rate, prioritizing either one or the other. Capture mode is set the first time the product is accessed. Select the desired Capture Mode from the drop-down list and click OK. See also Capture mode, on page 18.
AXIS P3367–V Fixed Dome Network Camera Accessing the product Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view. The Record button is used to record the current video stream. The location where the recording is saved can be specified in the AMC Control Panel. AMC Audio controls AMC audio buttons control the speakers and microphone connected to the client computer.
AXIS P3367–V Fixed Dome Network Camera Accessing the product Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position. The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls, on page 26.
AXIS P3367–V Fixed Dome Network Camera Media streams Media streams The Axis product provides several image and video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available stream profiles. Other applications and clients can access video and audio streams directly, without going via the Live View page. How to stream H.
AXIS P3367–V Fixed Dome Network Camera Media streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: • Windows Control Panel (from the Start menu) • Alternatively, right-click the video image in Internet Explorer and click Settings.
AXIS P3367–V Fixed Dome Network Camera Media streams Note • = IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.
AXIS P3367–V Fixed Dome Network Camera Setting up the product Setting up the product The Axis product can be configured by users with administrator or operator rights. Click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all settings except System Options See also the online help . Basic Setup Basic Setup provides shortcuts to the settings that should be made before using the Axis product: 1. Users.
AXIS P3367–V Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure the following: • Video stream settings. See page 16. • Stream profiles. See page 17. • Camera settings. See page 17. • View areas. See page 19. • Overlay image. See page 20. • Privacy mask. See page 20. • Focus and zoom. See page 20. • Audio settings. See page 21. • Audio clips. See page 22.
AXIS P3367–V Fixed Dome Network Camera Video and Audio Image You can modify the image resolution and compression, and rotate the image from the Image tab (Video & Audio > Video Stream). Setting the compression level affects the image quality and bandwidth; the lower the compression, the higher the image quality with higher bandwidth requirements. To avoid bandwidth problems on the network, you can limit the frame rate allowed to each viewer.
AXIS P3367–V Fixed Dome Network Camera Video and Audio Capture mode Capture mode defines how image data is taken from the image sensor in regards to resolution and frame rate, prioritizing either one or the other. The capture mode is set the first time the camera is accessed. See Configure capture mode, on page 9 . To change the capture mode setting, select the desired Capture Mode from the drop-down list and click OK.
AXIS P3367–V Fixed Dome Network Camera Video and Audio • Auto to set the shutter speed automatically. If required, use Max shutter to limit the shutter speed to prevent the frame rate from being reduced. For example, to get 30 fps, set Max shutter to 1/30. • Fixed to use a fixed shutter speed. Gain, measured in decibel (dB), is the amount of amplification applied to the image. A high gain may provide a better image in low light situations but will increase the amount of image noise.
AXIS P3367–V Fixed Dome Network Camera Video and Audio 2. Click Add. 3. The new view area appears under Selected view area. Enter a descriptive name in the Name field. 4. Select an Aspect ratio and a Video stream resolution. 5. A new view area covers the whole image. Use the mouse to move and resize the view area. 6. Check Enable PTZ to enable digital PTZ for this view area. 7. Click Save to save the settings. To modify a view area, select the view area in the list and modify the settings as required.
AXIS P3367–V Fixed Dome Network Camera Video and Audio 3. On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom position one step in either direction. The buttons << and >> move the zoom position in multiple steps in either direction. 4. Click Perform auto focus to focus the camera automatically. 5. If more adjustments are needed, go to the Advanced tab. Note • Changing the zoom level moves the focus position. Focus should always be adjusted after changing the zoom.
AXIS P3367–V Fixed Dome Network Camera Video and Audio Audio Input An external microphone or a line source can be connected to the product’s Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings. Source - Select Microphone for an external microphone or Line for a Line in device, e.g. an audio mixer for multiple microphones or a microphone with a built-in amplifier.
AXIS P3367–V Fixed Dome Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features of the Live View page. • Stream Profile. See page 17. • Default Viewer for Browser. See page 23. • Viewer Settings. See page 24. • Action Buttons. These are the buttons described in Controls on the Live View page, on page 9 . • User Defined Links. See page 24. • Output Buttons. See page 24.
AXIS P3367–V Fixed Dome Network Camera Live View Config Browser Viewer Description Windows Internet Explorer AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG) QuickTime H.264 Java applet A slower imaging alternative to AMC. Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher • JRE (J2SE) 5.0 or higher Still image Displays still images only.
AXIS P3367–V Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in at least one view area. For more information on view areas, see View Areas, on page 19. Preset positions A preset position is a predefined view that can be used to quickly steer the camera to a specific location. Preset positions can be accessed in several ways: • By selecting the preset from the Preset positions drop-down list in the Live View Page.
AXIS P3367–V Fixed Dome Network Camera PTZ (Pan Tilt Zoom) Guard Tour A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for configurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser. To add a guard tour: 1. Go to PTZ > Guard Tour and click Add. 2. Enter a descriptive name. 3. Specify the pause length between runs. 4. Select an available preset position and click Apply. 5.
AXIS P3367–V Fixed Dome Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go to Detectors > Camera Tampering. 2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated.
AXIS P3367–V Fixed Dome Network Camera Detectors Set up motion detection To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection. 2. Select a desired resolution for viewing while setting up Motion Detection from the View in list. 3. Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name. 4.
AXIS P3367–V Fixed Dome Network Camera Detectors Low level (0%) Even very small objects trigger motion detection. An object that appears in the window triggers motion detection only for a very short time before it is considered as non-moving. Only very bright objects on a dark background trigger motion detection.
AXIS P3367–V Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. For more information, go to www.axis.com/applications To upload an application, go to Applications > Packages, click Browse to locate the file and then click Upload Package. Click on the uploaded application’s name to open the menu options Settings, License and About. For configuration instructions, please refer to the documentation provided with the application.
AXIS P3367–V Fixed Dome Network Camera Events Events The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule. The action rule will apply at specific periods called Schedules. It is possible to specify how often the action rule will recur. This is called Recurrences.
AXIS P3367–V Fixed Dome Network Camera Events For more information, see the online help . Recipients Recipients receive image files and notification messages. A recipient can be an FTP, HTTP or TCP server, a network share or an email address. TCP servers are used for notification messages only. To add a recipient: 1. Go to Events > Recipients and click Add. 2. Enter a descriptive name 3. Select a recipient Type. 4. Enter the information needed for the recipient type. 5.
AXIS P3367–V Fixed Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 33. • To set up action rules, see page 31. • To access recordings, see Recording List, on page 33. • To configure camera controlled storage, see Storage, on page 40. Recording List Recordings made to the SD card and network share are listed on the Recordings > List page.
AXIS P3367–V Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.
AXIS P3367–V Fixed Dome Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices must authenticate themselves.
AXIS P3367–V Fixed Dome Network Camera System Options To change the date and time settings, select the preferred Time mode under New Server Time: • Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically. • Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously.
AXIS P3367–V Fixed Dome Network Camera System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting AVHS is enabled by default. The settings are configured under System Options > Network > TCP IP > Basic.
AXIS P3367–V Fixed Dome Network Camera System Options Link-Local IPv4 Address Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time. This function can be disabled under System Options > Network > TCP/IP > Advanced.
AXIS P3367–V Fixed Dome Network Camera System Options Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554. Note H.264 video streams will not be available if the RTSP server is disabled.
AXIS P3367–V Fixed Dome Network Camera System Options The following traps are available: • Cold start • Warm start • Link up • Authentication failed SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be enabled, see HTTPS, on page 34. To enable SNMP v3, check the box and provide the initial user password. Note The initial password can only be set once.
AXIS P3367–V Fixed Dome Network Camera System Options For more information, see the online help . Network Share Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings. To add a network share: 1. Go to System Options > Storage. 2. Click Network Share. 3. Enter the IP address, DNS or Bonjour name to the host server in the Host field. 4.
AXIS P3367–V Fixed Dome Network Camera System Options • the IEEE 802.1X settings Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to factory default settings, on page 43. To reset the optics to the factory default position, click Calibrate under Optics.
AXIS P3367–V Fixed Dome Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. Caution Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide assistance for problems with customized scripts. To open the Script Editor, go to System Options > Advanced > Scripting.
AXIS P3367–V Fixed Dome Network Camera System Options 2. Press and hold the Control button and reconnect power (see Hardware overview, on page 4 ). 3. Keep the Control button pressed for about 15 seconds until the Status indicator flashes amber. 4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The product has been reset to the factory default settings. The default IP address is 192.168.0.90 5. Re-assign the IP address.
AXIS P3367–V Fixed Dome Network Camera Troubleshooting Troubleshooting Checking the firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular problem. The current firmware version in the Axis product is displayed in the page Setup > Basic Setup and in Setup > System Options > About.
AXIS P3367–V Fixed Dome Network Camera Troubleshooting arp -s temp ping -s 408 In Windows, type the following from a command/DOS prompt: arp -s ping -l 408 -t 2. If the product does not reply within a few seconds, restart it and wait for a reply. Press CTRL+C to stop Ping. 3. Open a browser and type in the product’s IP address. In the page that appears, use the Browse button to select the upgrade file to use.
AXIS P3367–V Fixed Dome Network Camera Troubleshooting The product is accessible locally but not externally Router configuration To configure your router to allow incoming data traffic to the Axis product, enable the NAT-traversal feature which will attempt to automatically configure the router to allow access to the Axis product, see NAT traversal (port mapping) for IPv4, on page 38. The router must support UPnPTM. Firewall protection Check the Internet firewall with your network administrator.
AXIS P3367–V Fixed Dome Network Camera Troubleshooting Status indicator LED is flashing red and the product is inaccessible A firmware upgrade has been interrupted or the firmware has otherwise been damaged See Emergency recovery procedure, on page 45. No images displayed on web page Problems with AXIS Media Control (Internet Explorer only) To enable the updating of video images in Internet Explorer, set the browser to allow ActiveX controls.
AXIS P3367–V Fixed Dome Network Camera Troubleshooting Motion Detection triggers unexpectedly Changes in luminance Motion detection is based on changes in luminance in the image. This means that if there are sudden changes in the lighting, motion detection may trigger mistakenly. Lower the sensitivity setting to avoid problems with luminance. No audio Incorrect setup Check the sound card in the computer. Ensure that mute is not selected and that the volume settings are correct.
AXIS P3367–V Fixed Dome Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Camera Models AXIS P3367–V: 5 MP/HDTV 1080p, vandal-resistant, indoor Image sensor Progressive scan RGB CMOS 1/3.2'‘ Lens Varifocal with remote zoom and focus, IR corrected, megapixel resolution 3 – 9 mm, F1.
AXIS P3367–V Fixed Dome Network Camera Technical Specifications Function/group Item Specifications Audio Audio streaming Two-way Audio compression AAC LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s G.711 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Configurable bit rate Audio input/output Built-in microphone, external microphone input or line input, line output Security Password protection, IP address filtering, HTTPS encryption*, IEEE 802.
AXIS P3367–V Fixed Dome Network Camera Technical Specifications Function/group Item Specifications General Casing Polycarbonate transparent cover Aluminum inner camera module with encapsulated electronics IK10 impact-resistant aluminum casing Color: white NCS S 1002–B Processor, memory ARTPEC-4, 512 MB RAM, 128 MB Flash Battery backed-up real-time clock Power Power over Ethernet IEEE 802.3.af Class 2 Connectors RJ-45 10BASE-T/100BASE-TX PoE 3.
AXIS P3367–V Fixed Dome Network Camera Technical Specifications • Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected. • Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and bandwidth. • Accessing Motion JPEG and H.264 video streams simultaneously. Frame rate and bandwidth affected. • Heavy usage of event settings affect the product’s CPU load. Frame rate affected.
User Manual AXIS P3367–V Fixed Dome Network Camera © Axis Communications AB, 2011 Ver. M2.2 Date: July 2011 Part No.