User`s manual

5-15
IM 701610-01E
Vertical and Horizontal Axes
5
5.10 Using the Linear Scaling Function
<For a description of this function, see page 1-21>
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
1. Press one of the keys from CH1 to CH4 (or CH1 to CH2 for the DL1620) to select
the channel.
2. Press the Next 1/2 soft key.
3. Press the Linear Scl AX+B soft key to select ON.
4. Press the A/B soft key.
5. Turn the jog shuttle to set the value of A.
You can use the arrow keys to move between the digits.
6. In a similar fashion, set the value B.
7. If necessary, press the Unit soft key to display the keyboard and enter the unit.
Note
• Linear scaling is not available for the following waveforms.
Snapshot waveforms
Accumulated waveforms (except for newest waveform)
• You can set linear scaling separately for each channel.
• The A and B values remain in memory after you switch the linear scaling function OFF, and
are restored if you switch the function back on.
• Mathematical computations operate with respect to the scaling results.