User`s manual

7-8
IM 701610-01E
7.6 Using the History Memory
<For a description of this function, see page 1-17>
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
Recalling Data from the History Memory
1. Press HISTORY.
2. Press the Select Record soft key.
3. Turn the jog shuttle to set the record number that you wish to recall.
Specify a record number in the range Start Rec to End Rec.
4. Press the Display Mode soft key to select One or All.
Go to step 5 if you selected All. Otherwise, go to step 8.
Setting the Accumulation Range (When Display Mode is All)
5. Press the Start Rec/End Rec soft key.
6. Turn the jog shuttle to set the first record number to be accumulated.
7. In a similar fashion, set the end record number (End Rec).