User`s manual

8-27
IM 701610-01E
Display
8
When Performing an Auto Scroll Search
1. Press SHIFT to activate the shift mode.
2. Press ZOOM.
Selecting the Search Method (Type)
3. Press the Type soft key to display the search method selection menu.
4. Press the Auto Scroll soft key.
Selecting the Scroll Direction
5. Press the Direction soft key to set the scrolling direction.
Setting the Search Results Display Position (When Zoom Mode is Z1&Z2 or
Main&Z1&Z2)
6. Press the Results Window soft key to select Z1 or Z2.
Changing the Zooming Factor and Position
7. As you did with the zoomed waveform, press the Z1 Mag/Z2 Mag soft key, then
turn the jog shuttle to change the part which is expanded and displayed in Z1 and
Z2.
8. As you did with the zoomed waveform, press the Z1 Pos/Z2 Pos soft key, then turn
the jog shuttle to change the part which is expanded and displayed in Z1 and Z2.
Setting the Scroll Speed
9. Press the Speed soft key, then use the jog shuttle to set the scroll speed from 1 to
7.
Executing the Scroll
10. Press the Exec soft key to perform the Scroll. Press the key again to stop the
Scroll.
8.10 Search Data Using Search and Zoom Function