User`s manual

9-1
IM 701610-01E
Waveform Analysis
9
9.1 Measuring Waveforms Using Cursors
<For a description of this function, see page 1-21>
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
Selecting the Cursor Type
1. Press CURSOR.
2. Pressing the Type soft key displays the cursor type menu.
3. Press the soft key corresponding to the desired cursor type to select the cursor.
When not Displaying the X-Y Waveform
When Displaying the X-Y Waveform
For H (Horizontal) Cursors (When Not Displaying the X-Y Waveform)
Selecting the Waveform to be Measured
See steps 1-3 to set the Type to Horizontal.
4. Pressing the Trace soft key displays the waveform menu.
5. Press the soft key corresponding to the desired waveform. (CH3, CH4, and Math2
are not displayed on the DL1620.)
Chapter 9 Waveform Analysis