User`s manual

9-5

IM 701610-01E

Waveform Analysis

For H&V Cursors (When Not Displaying the X-Y Waveform)

Selecting the Waveform to be Measured

See steps 1-3 to set the Type to H&V.

4. Pressing the Trace soft key displays the waveform menu.

5. Press the soft key corresponding to the desired waveform. (CH3, CH4, and Math2

are not displayed on the DL1620.)

Moving the Cursor

6. Press the Curs1

/Curs2 soft key to activate the jog shuttle on Curs1 (Cursor 1).

7. Turn the jog shuttle to move Curs1 (Cursor 1).

8. Move Curs2 (Cursor 2) in the same manner.

If you activate the jog shuttle on both Curs1 and Curs2, you can move both cursors

at the same time.

9. Move Curs1

/Curs2 in the same manner according to steps 6 through 8.

Cursor1

Cursor2

Cursor1

Cursor2

9.1 Measuring Waveforms Using Cursors