User`s manual

9-6
IM 701610-01E
Measuring Historical Data with the V Cursors (Vertical History)
Selecting the Target Waveform
See steps 1-3 to set the Type to Vertical History.
4. Pressing the Trace soft key displays the waveform menu.
5. Press the soft key corresponding to the desired waveform. (CH3, CH4, and Math2
are not displayed on the DL1620.)
Moving the Cursor
6. Press the Cursor1/Cursor2 soft key to set the jog shuttle control to Cursor1.
7. Turn the jog shuttle to move Cursor1.
8. Move Cursor2 in a similar fashion.
If the jog shuttle control is set to both Cursor1 and Cursor2, both cursors are
moved.
Performing Statistical Computations Between Cursors
9. Press the Cursor Exec soft key to perform statistical computations between
cursors.
The results are displayed at the top of the screen.
Displaying the Cursor Position Measurement Values
10. Press the Show Result soft key to display the historical data for cursor position
measurement values in a list.
Press the Max/Min Item1 to Min/Max Item4 soft keys to emphasize the maximum
and minimum of each measurement value in the display. The displayed
measurement values become Item1, Item2, Item3, and Item4, from the left.
Press the Sort soft key to sort the results ascending (FWD) or descending (REV).
9.1 Measuring Waveforms Using Cursors