User`s manual

9-8
IM 701610-01E
For H (Horizontal) Cursors (When Displaying the X-Y Waveform)
Selecting the waveform to be measured
See steps 1-3 to set the Type to Horizontal.
4. Press the Trace soft key to select the desired waveform.
Moving the Cursor
5. Press the Cursor1/Cursor2 soft key to set the jog shuttle control to Cursor1.
6. Turn the jog shuttle to move Cursor1.
7. Move Cursor2 in a similar fashion.
Cursor1
Cursor2
If the jog shuttle control is set to both Cursor1 and Cursor2, both cursors are
moved.
For V (Vertical) Cursors (When Displaying the X-Y Waveform)
Selecting the Waveform to be Measured
See steps 1-3 to set the Type to Vertical.
4. Press the Trace soft key to select the desired waveform.
Moving the Cursor
5. Press the Cursor1/Cursor2 soft key to set the jog shuttle control to Cursor1.
6. Turn the jog shuttle to move Cursor1.
9.1 Measuring Waveforms Using Cursors