User`s manual

9-28
IM 701610-01E
9.4 Performing Automated Measurements of
Waveform Parameters on Dual Areas
<For a description of this function, see page 1-23>
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
1. Press MEASURE.
2. Press the Mode soft key to display the automated measurement mode menu.
3. Press the ON soft key to set the automated measurement mode.
Selecting the Measurement Parameter
4. Press the Item Setup soft key. Dual Area is displayed at the right end of the soft
key menu.
5. Press the Dual Area soft key to turn it ON. (To return to the usual automated
measurement screen, press the Dual Area soft key again to turn it OFF.) (CH3,
CH4, and Math2 are not displayed on the DL1620.)