User`s manual

9-34
IM 701610-01E
9.4 Performing Automated Measurements of Waveform Parameters on Dual Areas
Precautions to be Taken when Performing Automated Measurement of Waveform
Parameters
• The measurement value displays “*****” if the measurement is not possible.
• For waveforms of small amplitude, correct measurements may not be possible.
• When there are two or more periods of waveform in the measurement range, the time
axis parameter measurement is performed on the first cycle.
• Every time the waveform is updated, the waveform parameters are measured
automatically.
• When loading waveform data of the maximum record length, automatic measurement
of waveform parameters cannot be performed on calculated waveforms. ***** is
displayed for the measured results.