User`s manual

9-39
IM 701610-01E
Waveform Analysis
9
Selecting the Channel on which to Perform Computation
7. Turn the jog shuttle to move the cursor to Source.
8. Pressing SELECT displays the channel setting menu.
9. Turn the jog shuttle to select the channel on which to perform computation and
press SELECT.
Scaling
10. Turn the jog shuttle to move the cursor to Scale.
11. Press SELECT to select Auto or Manual. If you select Auto, go to step 18.
12. If you selected Manual, turn the jog shuttle to move the cursor to Center.
13. Press SELECT to display a menu used to set the position of the center in the
waveform display.
14. Turn the jog shuttle to set the position of the center and press SELECT.
15. Turn the jog shuttle to move the cursor to Sensitivity.
16. Press SELECT to display the menu used to set values in 1-div increments.
17. Turn the jog shuttle to set values in 1-div increments and press SELECT.
Setting the Unit
18. Turn the jog shuttle to move the cursor to Unit.
19. Using the keyboard that appears when SELECT is pressed enter the unit using
four characters or less.
9.6 Displaying the Power Spectrum