User`s manual

10-4
IM 701610-01E
Setting the Output Range (When the Output Format is Set to Long)
11. If you selected Long in step 5, set the output range.
Press the T-Range1/T-Range2 soft key to set the jog shuttle control to T-Range1.
12. Turn the jog shuttle to set the start point of the output range.
13. In a similar fashion, set the end point of the output range in T-Range2.
Previewing (Long Copy)
14. Pressing the Preview soft key displays the output image on the screen.
15. Turning the jog shuttle changes the displayed page.
16. Pressing the Quit soft key returns to the original screen.
Executing Print Out
17. Pressing COPY outputs a hard copy of the screen.
Pressing COPY again aborts the output.
Output Example when Mag is Set to Long
10.2 Outputting Screen Image Data to the Built-in Printer (Option)