User`s manual

10-7
IM 701610-01E
Output of Screen Image Data
10
Selecting the Printer
5. Press SHIFT to activate shift mode. Functions marked in purple on the panel
become active.
6. Press COPY.
7. Press the Copy to soft key to display the output medium selection menu.
8. Press the USB soft key to select USB.
Selecting the Type
9. Press the Format soft key to display the menu used to select the output command
type.
10. Press the soft key corresponding to the desired command type.
Setting the Color
11. Press the Color soft key to select ON or OFF.
Setting Comments
12. Press the Comment soft key. A keyboard appears on the screen.
13. Enter the comment string according to the procedure given in section 4.1.
Setting the Resolution (When Format is Set to BJ)
14. Press the Resolution soft key to display the resolution menu.
15. Press one of the soft keys corresponding to 180 dpi, 300 dpi, 360 dpi, and 600
dpi to set the resolution.
Executing Hard Copy
16. Press COPY to output a hard copy of the screen. Press COPY again to stop the
output.
10.3 Outputting Screen Image Data to a USB Printer (Option)