User`s manual

11-2
IM 701610-01E
11.2 Zip Disks
Zip Disks that can be Used
The following types can be used. You can format the zip disk on the DL1620/DL1640/
DL1640L.
Size: 100 MB and 250 MB
Format: FDISK 1 partition (hard disk format)
Inserting the Zip Disk in the Zip Drive
With the label facing left, insert the disk from the side with the shutter.
Removing the Zip Disk from the Zip Drive
With the DL1620/DL1640/DL1640L turned ON, check that the access indicator is turned
OFF and press the eject button.
Eject Button
Access Indicator
Procedure when the Zip Disk cannot be Ejected
If the Zip disk cannot be removed by performing the steps given above in “Removing the
Zip Disk from the Zip Drive”, carry out the following steps to remove it.
Insert a pin of approximately 1 mm in diameter into the eject button hole and press
slowly. This will cause the Zip disk to be ejected.
Zip Disk Eject
Button
Pin
Insert
Hole for Removing the
Zip Disk