User`s manual

11-13
IM 701610-01E
Saving and Loading Data to and from the Storage Medium
11
Selecting the Destination Directory
(Use this only when there are directories on the medium.)
16. Turn the jog shuttle to select the save destination directory (displayed in angle
brackets < >).
17. Press SELECT to confirm the selection.
The Path=___ box on the top left corner of the File List dialog box displays the
selected medium/directory.
Selecting <..> moves to a higher level directory.
Setting the File Name/Comment
18. Pressing the File Name soft key displays the file name setting menu.
19. Turn the jog shuttle to select Auto Naming.
20. Press SELECT to select ON or OFF.
21. Turn the jog shuttle to select File Name.
22. Pressing SELECT displays a keyboard.
23. Enter the file name according to the procedures given in section 4.1.
24. Turn the jog shuttle to select Comment.
25. Pressing SELECT displays a keyboard.
26. Enter the file comment according to the procedures given in section 4.1.
27. Press ESC to close the file name setting dialog box.
Note
When Data Type is Float, Comment is not available.
Saving the File
28. Press the Save Exec soft key to save the file to the directory indicated in
Path=___. The name of the Save Exec soft key changes to Abort.
Canceling the Saving Operation
29. Press the Abort soft key to cancel the save operation. The name of the Abort soft
key changes to Save Exec.
Specifying the File to be Displayed in the File List Dialog Box and Viewing its
Properties
30. In the File List dialog box, press the Filter soft key to select *.extension or *.*.
31. In the File List dialog box, turn the jog shuttle to select the desired file.
32. Pressing the Property soft key displays the properties of the selected file.
33. Pressing ESC closes the window displaying the properties.
11.6 Saving/Loading Waveform Data