User`s manual

11-24
IM 701610-01E
11.8 Saving/Loading Snapshot Waveforms
Saving the File
4. Press the Save Exec soft key to save the file to the directory indicated in
Path=___. The name of the Save Exec soft key changes to Abort.
Canceling the Saving Operation
5. Press the Abort soft key to cancel the saving operation. The name of the Abort
soft key changes to Save Exec.
Specifying the File to be Displayed in the File List Dialog Box, Viewing the
Properties
The procedures are the same as steps 30 to 33 in section 11.6, “Saving/Loading
Waveform Data.”
Loading Snapshot Waveforms
Follow steps 1-3 to select snapshot data waveforms.
4. Pressing the Load soft key displays the load setting menu and the file list dialog
box.
Selecting the Source Medium/Directory
The procedures are the same as steps 13 to 17 in section 11.6, “Saving/Loading
Waveform Data.”
Selecting the File to be Loaded
5. Turn the jog shuttle to select a file.
Selecting the Snapshot Waveform to be Loaded
6. Press the Destination soft key to display a menu used to select the snapshot
waveform.
7. Press the soft key corresponding to the desired snapshot waveform to make the
selection.