User`s manual

1-13
IM 701610-01E
Functions
1
Trigger Delay <Section 6.2>
Normally, the waveform around the trigger point is displayed. However the trigger delay
function enables display of a waveform which has been acquired after a specified time
(called the delay time) has elapsed following activation of a trigger. The range for the
trigger delay setting is 0 to 4 seconds.
Delay Time
Trigger Point
T (Trigger Position)
Trigger Position <Section 6.3>
The trigger position indicates which position of the waveform in the acquisition memory
will actually be displayed on the screen. The trigger point refers to the point at which a
trigger is activated. In case the trigger delay (to be explained here after) is set to 0s, the
trigger point and the trigger position see the same location.
You use this setting to select how much pre-trigger area and how much post-trigger area
to show on the display.
Display Record Length
Trigger Position
Pre-Trigger Range Post-Trigger Range
0%
100%
1.3 Setting a Trigger