User`s manual

11-28
IM 701610-01E
11.9 Saving the Results of the Automated Measurement of Waveform Parameters
Saving the File
4. Press the Save Exec soft key to save the file to the directory indicated in
Path=___. The name of the Save Exec soft key changes to Abort.
Canceling the Saving Operation
5. Press the Abort soft key to cancel the saving operation. The name of the Abort
soft key changes to Save Exec.
Specifying the File to be Displayed in the File List Dialog Box, Viewing the
Properties
The procedures are the same as steps 30 to 33 in section 11.6, “Saving/Loading
Waveform Data.”
Explanation
The results of the automated measurement of waveform parameters can be saved in
CSV format (.CSV file extension) to a floppy disk, a Zip disk, PC card or USB storage.
A CSV file is a comma-separated format file. The CSV file is one of the common file
formats used to exchange data between spreadsheet and database applications.
The data that are saved are the measurement results of the parameters that are
specified in the automated measurement of waveform parameters.
Notes when Saving the Results of the Automated Measurement of Waveform
Parameters
The restrictions are as follows.
• Up to (32000/the number of items that are turned ON) data points before the point at
which the save operation is executed are saved. However, the data points that are
saved are limited to those that are acquired after fixing T/div, V/div, and Measure
settings.
• Output example
CH1 P-P, CH1 Max, CH1 Min, CH2 P-P
V, V, V, V
-70 0.199E+00, 0.199E+00, 0.000E+00, 0.02E-06 Oldest data
-65 0.207E+00, 0.207E+00, 0.000E+00, 0.02E-06
-60 0.377E+00, 0.152E+00, –0.125E+00, 0.02E-06
•• • • • ↓
•• • • •
•• • • •
•• •• •Newest data
For information related to the automated measurement of waveform parameters, see
section 9.2, “Automated Measurement of Waveform Parameters.”
Data Size
Data size = Number of items × 15 × number of history waveforms