User`s manual

11-30
IM 701610-01E
11.10 Saving the Cursor Measurement Values
CAUTION
Never remove the medium or turn OFF the power while the access
indicator or storage medium icon is blinking. This can damage the
medium or destroy the data on the medium.
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
1. Press FILE.
2. Pressing the File Item soft key displays the file item setting menu.
3. Press the soft key corresponding to Cursor.
Selecting the Destination Medium/Directory
The procedures are the same as steps 13 to 17 in section 11.6, “Saving/Loading
Waveform Data.”
Setting the File Name/Comment
The procedures are the same as steps 18 to 27 in section 11.6, “Saving/Loading
Waveform Data.”
Note
When saving the results of the cursor measurement values, Comment is not available.