User`s manual

11-43
IM 701610-01E
Saving and Loading Data to and from the Storage Medium
11
11.13 Changing the Directory/File Name of the Storage Medium and Creating a Directory
Creating a Directory
Follow steps 1-3 to display the file function selection menu.
4. Press the soft key corresponding to Make Dir.
Selecting the Medium/Directory
5. The procedures are the same as steps 13 to 17 in section 11.6, “Saving/Loading
Waveform Data.”
Creating the Directory
6. Turn the jog shuttle to select a medium or a directory.
7. Pressing the Dir Name soft key displays a keyboard.
8. Enter the directory/file name according to the procedures given in section 4.1.
Specifying the File to be Displayed in the File List Dialog Box, Viewing the
Properties
The procedures are the same as steps 30 to 33 in section 11.6, “Saving/Loading
Waveform Data.”
Explanation
Selecting the Medium and Directory
The storage medium that can be used to save and load waveform data are displayed in
the File List dialog box.
• Display Example of Storage Medium
Flash_Mem : Internal flash memory
PC_Card : PC card
FD : Floppy disk
ZIP : Zip disk
NetWork : Network drive (available with the Ethernet interface option)
USB : USB storage
Selecting the File Attributes
Select the attributes for each file from the following choices.
• R/W
Read and write possible.
•R
Read only. Cannot write to the file or delete the file.