User`s manual

13-3
IM 701610-01E
Ethernet Interface (Option)
13
13.2 Configuring the Ethernet Interface (TCP/IP)
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
1. Press MISC.
2. Press the Network soft key to display the Network menu.
3. Press the TCP/IP Setup soft key to display the TCP/IP settings menu.
DHCP ON/OFF
4. Move the cursor to DHCP using the jog shuttle and press SELECT to turn DHCP
ON or OFF. If you select ON, then it is not necessary to the set the IP address,
subnet mask, and default gateway. If you wish to set up the DNS, please skip to
step 11. If you do not wish to set up the DNS, check the network cable connection
and restart the DL1620/DL1640/DL1640L. The IP address, subnet mask, and
default gateway are automatically set.
Settings for the following items can be
input directly using a USB keyboard. ( )
Setting the IP Address
Set the IP address if you turned DHCP OFF in step 4.
5. Move the cursor to the IP Address field with the jog shuttle, and press SELECT to
display the settings menu.
6. Enter the IP address values from 0 to 255 using the jog shuttle.