User`s manual

13-4
IM 701610-01E
Setting the Subnet Mask
Set the subnet mask if you turned DHCP OFF in step 4.
7. Move the cursor to the Net Mask field using the jog shuttle, and press SELECT to
display the settings menu.
8. Enter the subnet mask address values from 0 to 255 using the jog shuttle.
Setting the Default Gateway
Set the default gateway if you turned DHCP OFF in step 4.
9. Move the cursor to the Gate Way field with the jog shuttle, and press SELECT to
display the settings menu.
10. Enter the default gateway address values from 0 to 255 using the jog shuttle.
Setting the DNS
11. Move the cursor to DNS by turning the jog shuttle.
12. Press SELECT to display the DNS setting menu.
13. Press SELECT to set the DNS to ON, OFF, or AUTO (AUTO available only when
DHCP is ON). When DNS is set to AUTO, the domain name and DNS server
name are automatically set by restarting the instrument. If DNS is set to ON, the
domain name, DNS server name, and domain suffix are displayed. If DNS is set to
OFF, check the network cable connection and restart the DL1620/DL1640/
DL1640L.
Settings for the following items can be
input directly using a USB keyboard. ( )
14. Move the cursor to Domain Name by turning the jog shuttle.
15. Press SELECT to display the keyboard.
16. Input the domain name.
17. Move the cursor with the jog shuttle to the DNS Server 1 field, and press SELECT
to display the setting menu.
18. Set the primary DNS server values from 0 to 255 using the jog shuttle.
13.2 Configuring the Ethernet Interface (TCP/IP)