User`s manual
13-20
IM 701610-01E
6. Use the jog shuttle to move the cursor to Action, and select Send Mail.
7. Select Mail Count to set a limit for the number of mails that are sent.
8. Press the Exec soft key to start GO/NO-GO.
Note
• The e-mail destination is the Mail Address set in MISC, NetWork, Mail Setup.
• For mail sent by this instrument, the sender’s address will be the same as the specified
recipient address.
• This function can be used in conjunction with 13.6, “Using the Mail Function (Fixed Interval.)”
Turn the Interval OFF only when using the action mail function.
• Before uisng this function, see section 13.2, “Configuring the Ethernet Interface (TCP/IP)”
and enter the TCP/IP settings.
Explanation
You can send the trigger time and other information to the specified network mail
address as the action of a GO/NO-GO determination or an action trigger.
Mail Settings
For details, see section 13.6, “Using the Mail Function (Fixed Interval).”
• Attaching Image Files, Version 1.13 or Later
If the attach screen image data setting was selected using the procedure in section
13.6, "Using the Mail Function (Fixed Interval)," the current screen image is attached
every time an e-mail is sent. The file name is automatically assigned in the format
DL_nnnn.png (where nnnn is a number from 0001 to 1000).
Data Sent from the DL1620/DL1640/DL1640L
The following five items are sent.
• Acquisition status
Start/Stop, acquisition counter
• Trigger time
• GO/NO-GO success/fail information
Time of GO/NO-GO determination only (see sections 9.9 and 9.10)
• Cause of failure
Time of GO/NO-GO determination only (see sections 9.9 and 9.10)
• Results of waveform parameter measurement
Automatic measurement of waveform parameters (see sections 9.2 and 9.4), and the
time of GO/NO-GO determination by waveform parameters only (see section 9.9)
Sample Transmission Report
[Comment] aaaaaa
[ACQ Status] Stopped 1
[Trigger Date and Time] 2000/07/17 17:28:59.38
[GO/NOGO Status] Success: 9 Fail: 1
[NOGO Factor] Param4(Ch4,tWd )
Max (C1) 4.16667V
SDv (C2) 697.941mV
Freq(C3) 500.0000kHz
+Wd (C4) 1.00us>
13.7 Using the Mail Function (Action Mail Function)