User`s manual

13-23
IM 701610-01E
Ethernet Interface (Option)
13
13.9 Viewing the Ethernet Interface Option and MAC
Address
Relevant Keys
ACTION DELAY
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MODE POSITION
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
CH 3
CH 4
POWER
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQSTART/STOP
SNAP
SHOT
VDIV TIME DIV
Operating Procedure
1. Press MISC.
2. Press the Overview soft key.
3. When Ether:Yse(/C7) appears for the Option item in the overview screen, this
indicates that the Ethernet interface is installed.
The number on the right side is the MAC address (in the example,
MAC:000064_830_051).
Note
• Ether: Yes (/C7) is only displayed if the Ethernet interface option is installed.
• If XXXXXX_XXX_XXX is displayed for your MAC address, contact your nearest YOKOGAWA
dealer.
Explanation
Check the MAC address, and whether the Ethernet interface (optional) is installed.
The Presence of the Ethernet Interface (Option)
The presence of the Ethernet interface is displayed under Ethernet in the Information
window.
• If Yes is displayed, the Ethernet interface is installed.
• If No is displayed, the Ethernet interface is not installed.
MAC Address
The MAC address is a unique address that has already been set on the instrument, and
is necessary for transmission between nodes.