User`s manual

13-31
IM 701610-01E
Ethernet Interface (Option)
13
Preparations for Using the Web Server Function
Connecting the Computer and the DL1620/DL1640/DL1640L to the Network
Connect the computer and the DL1620/DL1640/DL1640L to the network. For the
connection procedure, see section 13.1.
Preparations on the DL1620/DL1640/DL1640L
Setting the Communication Interface to Network
X - Y
MENU MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECTRESET
SIMPLE
MATH
MISCFILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH 1
CH 2
COPY
IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQ START/STOP
SNAP
SHOT
Turn ON the DL1620/DL1640/DL1640L. After it starts, perform the following procedure.
1. Press MISC to display the MISC menu.
2. Press the Remote Cntl soft key to display the Remote Cntl menu.
3. Press the Device soft key to display the Device menu.
4. Press the Network soft key. The Ethernet interface is selected as the
communication interface.
Setting up the TCP/IP
5. Set the TCP/IP on the computer and the DL1620/DL1640/DL1640L. For the
procedure on the DL1620/DL1640/DL1640L, see section 13.2.
Setting the User Account Used to Access the DL1620/DL1640/DL1640L
6. Set the user account used to access the DL1620/DL1640/DL1640L from the
computer. For the procedure, see section 13.8.
Setting the Time Difference from the GMT (Greenwich Mean Time)
7. Set the time difference between the DL1620/DL1640/DL1640L location and the
GMT. For the procedure, see section 13.11.
Rebooting
8. To activate the TCP/IP, user account, and time difference settings, turn OFF the
DL1620/DL1640/DL1640L. After a few seconds, turn ON the DL1620/DL1640/
DL1640L again.
13.12 Using the Web Server Function