User`s manual

13-40
IM 701610-01E
Note
• Depending on the operating condition of the DL1620/DL1640/DL1640L (such as when
measurements are in progress), it may not be possible to save data or load setup data.
• When data is being saved or the setup data is being loaded, other Web server functions
cannot be used.
• When loading setup data or aborting a save operation, a temporary file (zzzftpzzztmpzzz.bat)
is created in the Internet Explorer startup folder. When the operation is complete, the
temporary file is deleted.
• If you try to save data when there is no waveform data or waveform parameter, an error
appears on the DL1620/DL1640/DL1640L screen, and a 0-byte file is saved.
Controlling the DL1620/DL1640/DL1640L (Instrument Control)
You can use the computer to set the display format and the data save conditions of the
DL1620/DL1640/DL1640L. The settings made here apply to the display format and save
conditions used to save the data described on the previous page.
• Starting/Stopping Waveform Acquisition (Acquisition)
Start: Click Start to start waveform acquisition.
Stop: Click Stop to stop waveform acquisition.
• Turning the Waveform Display ON or OFF, and Setting the Vertical Position
(Channel)
Selecting the Target Waveform
In the Channel group box, select the channel that you want to display or not, and
for which you want to set the vertical position from the following:
Chan1 to Chan4 (or Chan1 to Chan2 (channels1 to 2) for the DL1620) (channels 1
to 4)
Display ON or OFF
To display the waveform of the selected channel (turn it ON), select the Display
check box. Clear the check box not to display the waveform of the selected
channel (turn it OFF).
Vertical Position
You can set the vertical position of the waveform of the selected channel. For a
description of the vertical position selectable range, see section 5.2.
• Setting the Display Format (Display)
Display Format
Select the number of divisions on the screen when displaying waveforms from the
following:
Single, Dual, or Quad.
For the meaning of the selections, see the explanations in section 8.1.
Turning the Display of the Waveform Labels and Scale Values (Label) ON or OFF
• Display Waveform Label (TraceLabel)
To display the labels of the displayed waveforms, select the TraceLabel check
box. Clear the check box not to display the labels.
• Turning the Display of the Upper and Lower Limits of the Displayed Waveforms
(ScaleValue) ON or OFF
To display the upper and lower limits of the displayed waveforms, select the
ScaleValue check box. Clear the check box not to display the upper and lower
limits.
13.12 Using the Web Server Function