User`s manual

13-52
IM 701610-01E
13.13 Using the Instrument as a Windows Network
Drive (Version 1.13 or Later)
You can set up the internal memory or external storage medium of the DL1620/Dl1640/
DL1640L as a network drive accessible from a PC running Windows XP.
Operating Procedure
Setting Up the DL1620/DL1640/DL1640L
Follow the procedures in section 13.2, "Configuring the Ethernet Interface (TCP/
IP)," and section 13.8 "Accessing DL1620/DL1640/DL1640L Drives from a Network
Drive (FTP Server Function)" to enter TCP/IP and user account settings, then
connect to the network.
PC Settings
1. Open My Network Places.
2. Choose Map Network Drive under Tools on the menu bar. The Map Network Drive
dialog box appears.
3. Select the drive to assign in the drive selection area.
4. Enter the instrument's IP address in the folder input area using the format, http://
instrument's IP address/dav/.
5. The enter user name and password input dialog box appears. Enter the user name
and password specified under user account (see section 13.8, "Accessing DL1620/
DL1640/DL1640L drives from a network drive."
6. Click Finish. The instrument is registered as a network drive.
7. To cancel the registration as a network drive, select Disconnect Network Drive
under Tools on the menu bar. The disconnect network drive dialog box opens.
8. Select the network drive you wish to disconnect, and click OK.