User`s manual

15-3
IM 701610-01E
Troubleshooting, Maintenance and Inspection
15
Error in Execution (600 to 879)
Code Message Corrective Action Reference Section
601 Invalid file name. Check the file name. —
602, 603 No storage media inserted. Check the presence of the medium. —
604 Storage media failure. Check the medium. —
605 File not found. Check the filename and the medium. Chapter 11
606 Storage media is protected. Set the disk’s write protect switch to OFF. —
607 Storage media failure. Check the medium. —
608 to 610 Invalid file name. Check the file name. —
611, 612 Storage media full. Delete unnecessary files or use another disk. 11.11
The number of bytes necessary is given in
the pages indicated on the right.
613 Cannot delete a directory if there are files Delete all files in the directory before deleting 11.11
in the directory. the directory.
614 File is protected. Clear the write disable (*) mark. 11.11
615 Physical format error. Reformat the medium. If the same error 11.5
occurs, this instrument cannot format the
medium.
616 to 620 File system failure. Check using another medium. If the same —
message still appears, servicing is required.
621 File is damaged. Check the file. —
622 to 641, File system failure. Check using another medium. If the same —
656 to 663 message still appears, servicing is required.
646 to 653 Storage media failure. Check the medium —
654 Storage media failure. Check the floppy disk’s format type. 11.5
665 Cannot load this file format. Files stored on other models (DL/AG series) —
cannot be loaded.
666 File is now being accessed. Wait a moment. Execute after accessing is finished. —
667 Cannot be executed while data acquisition is Press START/STOP to stop thewaveform 4.5
in progress. acquisition.
668 Cannot find ‘.HDR’ file. Check the file. 11.6
669 Cannot load the specified file on this ROM Upgrade the ROM version (upper compatible). —
version or this model.
671 Save data not found. Check the presence of data to be stored. —
676 Unknown file format. Check whether the data file in a format that 11.12
is supported. Change the file extension.
677 P-P compression cannot be used to save Turn OFF the P-P compression. 11.6
FFT waveforms.
679 Data that have been P-P compressed and — —
saved cannot be loaded.
680 Cannot load waveform data that has been — 11.6
saved in history All mode when With
Setup mode is OFF.
Please turn With Setup mode ON.
681 Cannot load waveform data that has been — 11.6
saved in trace All mode when With
Setup mode is OFF.
Please turn With Setup mode ON.
682 Cannot load waveform data of more than — 11.6
8 M record length when With Setup mode
is OFF.
Please turn With Setup mode ON.
683 Cannot load compressed waveform data of — 11.6
more than 8 M record length.
684 Cannot load waveform data that has been — 11.6
compressed and saved in history All mode.
15.2 Messages and Corrective Actions