User`s manual

15-5
IM 701610-01E
Troubleshooting, Maintenance and Inspection
15
Code Message Corrective Action Reference Section
776 The File item is inappropriate. Select Waveform, Snap, or Measure. —
Select Waveform, Snap, or Measure.
777 Executing file Load, Save, or Format. — —
Abort or wait until it is complete.
778 Hard copying or saving image. — —
Abort or wait until it is complete.
779 Specified data does not exist. Execute the — —
analysis.
780 Failed to process statistics. — 9.1
The target waveform data may not exist.
810 Cannot connect to the server. Confirm the network settings and connection. Chapter 13
811 Not yet connected to the ftp server. Confirm the network settings and connection. Chapter 13
812 This ftp function in not supported. — Chapter 13
813 FTP Error: Rwd Confirm the network settings and connection. Chapter 13
814 FTP Error: Cwd Confirm the network settings and connection Chapter 13
815 FTP Error: Rm Confirm the network settings and connection. Chapter 13
816 FTP Error: List Confirm the network settings and connection. Chapter 13
817 FTP Error: Mkdir Confirm the network settings and connection. Chapter 13
818 FTP Error: Rmdir Confirm the network settings and connection. Chapter 13
819 FTP Error: Get Confirm the network settings and connection. Chapter 13
820 FTP Error: Put Confirm the network settings and connection. Chapter 13
821 FTP Error: GetData Confirm the network settings and connection. Chapter 13
822 FTP Error: PutData Confirm the network settings, connection, Chapter 13
and disk capacity.
823 FTP Error: AppendData Confirm the network settings, connection, Chapter 13
and disk capacity.
824 FTP Error: Client Handle Confirm the network settings and connection. Chapter 13
825 FTP Error: Others Confirm the network settings and connection. Chapter 13
845 Cannot send data to a network printer. Confirm the network settings and connection. Chapter 13
846 Cannot send the e-mail message. Confirm the network settings and connection. Chapter 13
857 Connecting to a NetDrive. — Chapter 13
Wait until connection has been established.
858 Failed to initialize network. Confirm the network settings, Chapter 13
859 The second time password is different from Set a correct password. Chapter 13
the first time. Please repeat the second time
password input.
860 Failed to acquire time from SNTP server. Confirm the network settings and connection. Chapter 13
Confirm the network settings and connections.
Error in Setting (880 to 959)
Code Message Corrective Action Reference Section
880 Illegal date/time. Set a correct date and time 3.6
881 Illegal file name. The file name contains characters that are 4.1
not allowed or the file name is restricted in
MS-DOS.
884 Cannot change this parameter while data. Press START/STOP to the waveform 4.5
acquisition is in progress. acquisition.
886 GO/NO-GO is in execution. Please press the All keys other than START/STOP are disabled 9.9, 9.10
Abort key. during GO/NO-GO determination.
894 Duplicated label. Set a different label. 8.5
899 Cannot change when Channel Display is OFF Turn ON the channel display or set Math 5.1
or Math settings are invalid. operation. 9.5 to 9.7
901 Cannot change when ExtClock is active. Change the timebase to Internal. 5.11
916 Cannot change settings during Select Abort or press START/STOP. 4.5, 6.15
action-on-trigger.
15.2 Messages and Corrective Actions