User`s manual

4-5

IM 701610-01E

Common Operations

Entering Numerical Values Using a USB Keyboard

Numerical values for menu items preceded by the

or symbol can be input directly

using a USB keyboard.

Press the corresponding soft key, enter the values with the USB keyboard, then

press the Enter key. The entered values are displayed in the upper part of the screen.

• Inputting a Units Prefix

If unit prefixes are displayed (such as m for Offset in the example above), you can

input the character for the prefix as well as the numerical value using the USB

keyboard. Prefixes can be entered for units of voltage (V) and time (s). Also, the

prefixes that can be used are determined by the allowable input range.

Input Example

• If you type 1 then Enter for the Offset, this means 1 V so 1000 mV is displayed on

the screen.

• If you type 1, 0, then m, this means 10 mV so 10 mV is displayed on the screen. If

you enter a prefix for the units, it is not necessary to press the Enter key.

The available unit prefixes are as follows:

Key Prefix

K or k 10

m10

–3

U or u 10

–6

N or n 10

–9

P or p 10

–12

4.1 Entering Values and Character Strings