User`s manual

5-3

IM 701610-01E

Vertical and Horizontal Axes

5.2 Setting the Vertical Position of a Waveform

Explanation

Range of Movement

The vertical position can be moved in the range between ±4 div from the center position

in the waveform display frame.

Setting Resolution

0.01 div

Confirming the Vertical Position

For input waveforms and computed waveforms, the ground level and vertical position are

marked on the left of the waveform display frame.

500 mV/div, Offset: –1 V, Offset Cancel: OFF, Position: 0 div

Ground Level

Mark

Vertical Position

Mark

Note

• The data which go out of the waveform display frame from moving the vertical position are

handled as overflow data.

• If the display waveform goes out of the waveform display frame from moving the vertical

position during the waveform acquisition is starting, a chopped waveform is displayed as

shown in the following figure even if the vertical position is returned to its original position

after stopping the acquisition.

• If the vertical position is moved, the effective data range also changes. For details, see

section 1.2.