User`s manual

NetWare
AXIS 1620 User’s Manual Section 4: Setting Up - NetWare
35
Section 4 Setting Up - NetWare
This section describes how to continue the installation of the AXIS
1620 in the NetWare environment. Identify which transport protocol
you are running on your network and which installation method you
should use. Continue the installation by selecting the appropriate
installing instructions from the table below:
If you intend to operate your AXIS 1620 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 5 Setting Up - Windows, on page 45
Section 6 Setting Up - OS/2, on page 71
Section 7 Setting Up - Macintosh, on page 77
Section 8 Setting Up - UNIX, on page 83
Tran spor t
Protocol
Installation
method
Action
IPX
NDPS
See Setup using NDPS, on page 36
Proceed with Installing the AXIS 1620 in IPX networks, on page 37.
Queue based
NetWare printing
If you have performed the basic installations as described in Basic
Setup with AXIS NetPilot, on page 22, the AXIS 1620 is already
installed for printing in the NetWare environment.
Advanced
configuration
If you need a more advanced installation that is not covered by the
AXIS NetPilot Installation Wizard, continue with Advanced
Installation using AXIS NetPilot, on page 39.
Pure IP
NDPS
see Setup using NDPS, on page 36.
Proceed with Installing the AXIS 1620 in Pure IP networks, on page
38
Queue based
NetWare printing
See Basic setup in Pure IP Networks, on page 42
Advanced
configuration
See Basic setup in Pure IP Networks, on page 42