User`s manual

OS/2
AXIS 1620 Users Manual Section 6: Setting Up - OS/2
71
Section 6 Setting Up - OS/2
Having connected the AXIS 1620 to your network, as described in
Connecting a printer to the Ethernet Network, on page 18, this section
now describes how to set up your AXIS 1620 for printing in the OS/2
environment.
Continue with the instructions presented in the table below:
If you intend to operate your AXIS 1620 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - NetWare, on page 35
Section 5 Setting Up - Windows, on page 45
Section 7 Setting Up - Macintosh, on page 77
Section 8 Setting Up - UNIX, on page 83
Printing
protocol
See ...
TCP/IP TCP/IP Printing, on page 72
NetBIOS/NetBEUI NetBIOS/NetBEUI Printing, on page 73